How to reduce the loss of laser cutting machine?

After a long time of use, the laser cutting machine will inevitably have some loss. Once the loss is too heavy, it will affect the service life and use effect of equipment parts, which will indirectly lead to the poor cutting quality of the cutting machine equipment. So in the face of this situation, how to effectively reduce its use loss?

Before starting the laser cutting machine, push the beam forward and backward by hand, and the trolley can be powered on only when there is no abnormal sound when it moves left and right. When completing the work of the day, carefully clean the waste and debris in the machine, so as to prevent the motion system of the machine from being damaged by foreign objects. Clean its moving parts to keep the machine in good working condition. The specific methods are as follows:

　　1. Objects shall not be placed in the machine to avoid unnecessary damage to the machine.
　　2. Clean the dust and foreign matters on the metal tanker, metal shaft, sliding block and linear guide rail with cotton cloth, add lubricating oil, and conduct empty reciprocating motion.
　　3. Inject a little lubricating oil into the screws, including the screws on the laser tube support and mirror, which can facilitate the disassembly and assembly during the maintenance of the laser cutting machine
　　Note: do not add lubricating oil to synchronous belt, drag chain, air pipe, motor, sensor, lens and wire.
　　 Therefore, in general, if you want to effectively reduce the use loss of the laser cutting machine, you must do a good job in the lubrication and maintenance of all parts, which can not only effectively reduce the loss, but also reduce the failure rate and prolong its service life.